iten
  • Underground Walls

    Isolamento pareti interrateProtection and Insulation of Underground WallsTEGOPLAST (size 75cm X 42 cm x h10.5) combined with some additional elements (grid, plugs, fixing elements, flexible angled junctions, etc.) can be used to effectively insulate and ventilate underground walls.
  • Floors

    Solai con tegoplastFloors with tegoplastTEGOPLAST can be employed to build floor support structures
    made of reinforced concrete rather than traditional lug bricks or other materials.
  • Crawlspace

    Vespaio areato Colosseo con tegoplastVentilated crawlspace ColosseoIt is easily used, the elements extreme lightness
    and rigidiness makes the laying stage quick and safe. TEGOPLAST is furnished of channels at the ends of it, facilitating its support
    on the ARCOPLAST rows.
  • Insulation

    Isolamento pareti interrateFloors ElevationTEGOPLAST can be used in an effective way to isolate and ventilate coverings, solar pavings and floor elevation.
    It creates an interspace which avoids the condensate formation and favours
    the heat insulation in the below environments.
Technical Card PDF Print E-mail
Insulation and protection of underground walls


PIECES IMPACT
   
PIECES / SQMPIECES / ML
PIECES / SQM
PIECES / MLPIECES / ML
3,20
2,38
3,20
2,38
1,33
Barrier laying: Average of time/people productivity = 6,00 sqm/h
 
Technical characteristics
Material
Recycled polypropylene
Dimensions (cm)
75x42x10,5 (LxPxH)
Weight/piece (kg)
2,5 (thickness 3 mm)
Compression resistant
6.000 kg/sqm
 

Specifications

ISOLATION AND VENTILATION OF UNDERGROUND WALLS and building elevation in concrete or masonry, of basements, carried out using recycled plastic modular elements (Tegoplast) 75 x 42cm x 10,5 cm thick, with open ended vaulted ribbings and drilled slots on both sides in order to grant ventilation in two directions. Placed vertically and linked together, they are fixed to the walls with fixing elements (Ø 4 screws) covering the whole surface to be isolated with horizontal lines measuring 75 cm.
The first placed at the lowest point on a plastic anchor grill and the highest one cut perfectly and covered with plastic caps.
Flexible plastic joints for corners, edges and cutting are included. Surface ventilation pipes and plate zinc flashings to be placed vertically on the lateral closings or horizontally o the upper part are excluded.

TEGOPLAST with a thickness of 10,5 cm €... sqm
RocketTheme Joomla Templates