iten
  • Insulation

    Isolamento pareti interrateFloors ElevationTEGOPLAST can be used in an effective way to isolate and ventilate coverings, solar pavings and floor elevation.
    It creates an interspace which avoids the condensate formation and favours
    the heat insulation in the below environments.
  • Floors

    Solai con tegoplastFloors with tegoplastTEGOPLAST can be employed to build floor support structures
    made of reinforced concrete rather than traditional lug bricks or other materials.
  • Crawlspace

    Vespaio areato Colosseo con tegoplastVentilated crawlspace ColosseoIt is easily used, the elements extreme lightness
    and rigidiness makes the laying stage quick and safe. TEGOPLAST is furnished of channels at the ends of it, facilitating its support
    on the ARCOPLAST rows.
  • Underground Walls

    Isolamento pareti interrateProtection and Insulation of Underground WallsTEGOPLAST (size 75cm X 42 cm x h10.5) combined with some additional elements (grid, plugs, fixing elements, flexible angled junctions, etc.) can be used to effectively insulate and ventilate underground walls.
Floors elevations, pierced platforms, coverings and solar pa PDF Print E-mail
TEGOPLAST (cm 75 x 42 x h= 5/10,5/14,5/18,5/23,5) can be used in an effective way to isolate and ventilate coverings, solar pavings and floor elevation.
It creates an interspace which avoids the condensate formation and favours the heat insulation in the below environments. It is ideal for redevelopment interventions of the floorings of old buildings and to the raising of the quota, thanks to the lightness and laying easiness. The mounting is rapid, it is sufficient to place side by side TEGOPLAST elements following the arrows direction and to advance the following rows till the completion of the surface to cover. Subsequently the electrosoldered net is placed and the filling concrete casting (lightened concrete) of the hot flush or upper slab is done with smooth and well levelled finishing and with suitable thicknesses taking into consideration its use. Proofing and sarking are necessary to isolate the covering.



 

Specifications

INSULATION AND VENTILATION: coverings, solar pavings, floor elevation and pierced platforms To build by modular elements made of recycled plastic (TEGOPLAST) size 75x42 cm x 10.5 cm thick with open ended vaulted ribbings and drilled slots of both sides in order to grant ventilation in two directions. Placed horizontally and linked together in two directions. Special plastic pieces (plugs, fixing elements and rafters for corners and edges) and cutting are included. Concrete for the foundations, section dividers, insulating panels and ventilation pipes (if any) are not included.

A) With TEGOPLAST H 5 / sqm € ...

B) With TEGOPLAST H 10,5 / sqm € ...

C) With TEGOPLAST H 14,5 / sqm € ...

D) With TEGOPLAST H 18,5 / sqm € ...

E) With TEGOPLAST H 23,5 / sqm € ...

F) With AIRTEGO H 23,5 + 6 / sqm € ...
RocketTheme Joomla Templates