iten
  • Insulation

    Isolamento pareti interrateFloors ElevationTEGOPLAST can be used in an effective way to isolate and ventilate coverings, solar pavings and floor elevation.
    It creates an interspace which avoids the condensate formation and favours
    the heat insulation in the below environments.
  • Floors

    Solai con tegoplastFloors with tegoplastTEGOPLAST can be employed to build floor support structures
    made of reinforced concrete rather than traditional lug bricks or other materials.
  • Crawlspace

    Vespaio areato Colosseo con tegoplastVentilated crawlspace ColosseoIt is easily used, the elements extreme lightness
    and rigidiness makes the laying stage quick and safe. TEGOPLAST is furnished of channels at the ends of it, facilitating its support
    on the ARCOPLAST rows.
  • Underground Walls

    Isolamento pareti interrateProtection and Insulation of Underground WallsTEGOPLAST (size 75cm X 42 cm x h10.5) combined with some additional elements (grid, plugs, fixing elements, flexible angled junctions, etc.) can be used to effectively insulate and ventilate underground walls.
Technical Card PDF Print E-mail
Floors elevation, pierced platforms, coverings and solar pavings insulation
(razed heights from cm 5 to 10,5/14,5/18,5/23,5)


PIECES IMPACT AND CONCRETE CONSUMPTION FOR FLOORS
ELEMENTS
Code
Razed height cm
Impact pieces
/sqm
Finishing mass concrete
Razed
Upper slab or hot flush*
TOTAL
lt/sqm
thickness cmlt/sqmlt/sqm
 RAC. L755
5,33
22
4
40
62,00
 TEGO.1275
10,5
3,20
19
4
40
59,00
 TEGO.1675
14,5
3,20
28
4
40
68,00
 TEGO.207518,5
3,20
34
4
40
74,00
 TEGO.257523,5
3,20
47
4
40
87,00
 AIRTEGO.257523,5+6
3,20
47
6
60
107,00
SPECIAL PIECES
*Special pieces can be necessary according to the typology of the work to do, for ex: PLUGS, VENTILATION GRIDS AND TEGOPLAST in different versions. Besides, TEGOPLASTS have to be anchored to the floor using an E.F.TEGO element fixed with fisher in order to isolate and ventilate sloping coverings. The hot flush can be made up of a lighter and more isolating material of the desired thicknesses.
E.F.TEGO
TAPPO
VENTILATION GRID
OPEN DX OR SX TEGOPLAST
 

Specifications

INSULATION AND VENTILATION: coverings, solar pavings, floor elevation and pierced platforms To build by modular elements made of recycled plastic (TEGOPLAST) size 75x42 cm x 10.5 cm thick with open ended vaulted ribbings and drilled slots of both sides in order to grant ventilation in two directions. Placed horizontally and linked together in two directions. Special plastic pieces (plugs, fixing elements and rafters for corners and edges) and cutting are included. Concrete for the foundations, section dividers, insulating panels and ventilation pipes (if any) are not included.

A) With TEGOPLAST H 5 / sqm € ...

B) With TEGOPLAST H 10,5 / sqm € ...

C) With TEGOPLAST H 14,5 / sqm € ...

D) With TEGOPLAST H 18,5 / sqm € ...

E) With TEGOPLAST H 23,5 / sqm € ...

F) With AIRTEGO H 23,5 + 6 / sqm € ...
RocketTheme Joomla Templates