iten
  • Underground Walls

    Isolamento pareti interrateProtection and Insulation of Underground WallsTEGOPLAST (size 75cm X 42 cm x h10.5) combined with some additional elements (grid, plugs, fixing elements, flexible angled junctions, etc.) can be used to effectively insulate and ventilate underground walls.
  • Floors

    Solai con tegoplastFloors with tegoplastTEGOPLAST can be employed to build floor support structures
    made of reinforced concrete rather than traditional lug bricks or other materials.
  • Crawlspace

    Vespaio areato Colosseo con tegoplastVentilated crawlspace ColosseoIt is easily used, the elements extreme lightness
    and rigidiness makes the laying stage quick and safe. TEGOPLAST is furnished of channels at the ends of it, facilitating its support
    on the ARCOPLAST rows.
  • Insulation

    Isolamento pareti interrateFloors ElevationTEGOPLAST can be used in an effective way to isolate and ventilate coverings, solar pavings and floor elevation.
    It creates an interspace which avoids the condensate formation and favours
    the heat insulation in the below environments.
Insulation and protection of underground walls PDF Print E-mail
TEGOPLAST (size 75cm X 42 cm x h10.5) combined with some additional elements (grid, plugs, fixing elements, flexible angled junctions, etc.) can be used to effectively insulate and ventilate underground walls. TEGOPLAST allows using any kind of cover ground making stones unnecessary.

TEGOPLAST ADVANTAGES
  • ECONOMICAL AND TIME SAVING
    It makes adhesive sheaths and bevelled sheets unnecessary on the circular walls (where there is no water sheet).
    It does not need any scaffolding for the laying phase, because the barrier is placed from the lower level upwards in horizontal rows. Moreover, inert materials for the vertical drainage are not needed for the filling up phase. It also allows installing the barrier just after removing the formwork from the walls.
  • EASY TO INSTALL
    Thanks to the lightness of the components, the protection barrier is easy to install. It easily adapts to curving walls. After assembling, the barrier immediately fastens to the insulated wall thanks to the anchorage by the fixing elements. As a result, there are no movements or slippages during the filling up.
  • INSULATION AND VENTILATION
    It allows effective ventilation every direction, helping the perimeter walls transpire and making underground walls healthy and energy saving.
  • WATERPROOFING
    It is guaranteed by the special overlap system of the elements which helps water flow down.





 

Specifications

ISOLATION AND VENTILATION OF UNDERGROUND WALLS and building elevation in concrete or masonry, of basements, carried out using recycled plastic modular elements (Tegoplast) 75 x 42cm x 10,5 cm thick, with open ended vaulted ribbings and drilled slots on both sides in order to grant ventilation in two directions. Placed vertically and linked together, they are fixed to the walls with fixing elements (Ø 4 screws) covering the whole surface to be isolated with horizontal lines measuring 75 cm.
The first placed at the lowest point on a plastic anchor grill and the highest one cut perfectly and covered with plastic caps.
Flexible plastic joints for corners, edges and cutting are included. Surface ventilation pipes and plate zinc flashings to be placed vertically on the lateral closings or horizontally o the upper part are excluded.

TEGOPLAST with a thickness of 10,5 cm €... sqm
RocketTheme Joomla Templates